iStarUSA TC-1U30FX2 User Manual

Page of 11
Page 
   
4
1. Introduction 
1.1 Scope
 
This specification defines the performance and characteristic for the model of 
TC-1U30FX2 power supply. 
 
1.2 General 
Description
 
TC-1U30FX2 is a 300W switching power supply, with an FLEX-ATX form factor,+5V 
standby voltage, remote on/off, dual line input capability.   
 
2. AC 
Input 
2.1 Voltage 
Range 
Voltage range: 100VAC ~    240VAC 
2.2 Frequency 
Range 
Frequency range:   47Hz – 63Hz 
 
2.3 Input 
Voltage 
Waveform 
Input    Voltage waveform:    Sine wave, modified sine wave or square wave 
 
2.4 Input 
Current 
2.4.1  Steady-state Current 
        Maximum current at 115 VAC (RMS): 
  5.0A 
    Maximum current at 230 VAC (RMS): 
 2.5A 
 
2.4.2    Cold Start Inrush Current 
    Maximum inrush current at 115 VAC:  
40A 
    Maximum inrush current at 230 VAC:  
50A  
       
 
* Measured at 25℃ ambient cold start. 
       
         
2.4.3 Input Over current Protection 
        The power supply is equipped with a non-reset-able fuse on the AC 
        input to limit power consumption on a failure within the power supply   
    module. 
    Input Fuse Rating: 
         Voltage                     250 V 
                  Current                         
         
                6.3A 
                  De-activation time                        300 ms