ZyXEL 202H 91-003-194003B User Manual

P-202H Plus v2 User’s Guide

153

Chapter 14 Maintenance

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL 
Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device 
provides the TCP/IP configuration for the clients. If set to None, DHCP service will be 
disabled and you must have another DHCP server on your LAN, or else the computer must be 
manually configured.

WAN Port 

Statistics

Channel

This shows statistics for B1 and B2 channels respectively. This is the information 

displayed for each channel.

Link

This shows the name of the remote node or the user the channel is currently 

connected to or the status of the channel (e.g., Down, Idle, Calling, Answering, 

NetCAPI, etc.).

Type

This is the current connecting speed.

TxPkts

This is the number of transmitted packets on this channel.

RxPkts

This is the number of received packets on this channel.

Errors

This displays the number of error packets on this channel.

CLU

The CLU (Current Line Utilization) is the percentage of current bandwidth used on 

this channel.

ALU

The ALU (Average Line Utilization) is a 5-second moving average of usage for this 

channel.

Up Time

Time this channel has been connected to the current remote node.

Channel

This shows statistics for B1 and B2 channels respectively. This is the information 

displayed for each channel.

Own IP Addr

This refers to the IP address of the ZyXEL Device.

Own CLID

This shows your Caller ID.

Peer IP Addr

This refers to the IP address of the peer.

Peer CLID

This refers to the Caller ID of the peer.

LAN Port Statistics

Interface

This shows the type of LAN interface connection.

Status

This displays the port speed and duplex setting.

TxPkts

This is the number of transmitted packets to the LAN.

RxPkts

This is the number of received packets from the LAN.

Collisions

This is the number of collisions on this port.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval(s) 

field.

Stop

Click Stop to stop refreshing statistics.

Table 48   System Status > Show Statistics (continued)