ZyXEL 202H 91-003-194003B User Manual

P-202H Plus v2 User’s Guide

163

Chapter 15 Introducing the SMT

Change the system password by following the steps shown next. 

1 Enter 23 in the main menu to open Menu 23 - System Security.

2 Enter 1 in menu 23 to display Menu 23.1 - System Security - Change Password.

3 Type your existing system password in the Old Password field, for example “1234”, and 

press [ENTER]

Figure 74   Menu 23 System Password

4 Type your new system password in the New Password field (up to 30 characters), and 

press [ENTER].

11

Remote Node Setup

Use this menu to configure detailed remote node settings (your ISP 
is also a remote node) as well as apply WAN filters.

12

Static Routing Setup

Use this menu to set up static routes. 

13

Default Dial-in Setup

Use this menu to set up default dial-in parameters so that your 
ZyXEL Device can be used as a dial-in server.

14

Dial-in User Setup

Use this menu to configure settings for remote dial-in users. 

15

NAT Setup

Use this menu to configure Network Address Translation.

21

Filter and Firewall Setup 

Use this menu to configure filters, activate/deactivate the firewall 
and view the firewall log.

22

SNMP Configuration 

Use this menu to set up SNMP related parameters.

23

System Security

Use this menu to change your password and set up an 
authentication server.

24

System Maintenance

This menu provides system status, diagnostics, software upload, 
etc.

26

Schedule Setup

Use this menu to schedule outgoing calls.

27

VPN/ IPSec Setup

Use this menu to configure VPN connections.

99

Exit

Use this to exit from SMT (necessary for remote configuration).

Table 54   Main Menu Summary

Menu 23.1 - System Security - Change Password

            Old Password= ?
            New Password= ?
            Retype to confirm= ?

Enter here to CONFIRM or ESC to CANCEL: