Fujitsu Q802 VFY:CQ802XX020E1 Data Sheet
Product codes
VFY:CQ802XX020E1
Data Sheet
Fujitsu CELVIN® NAS Server Q802 Storage
Page 2 / 6
www.fujitsu.com/fts/accessories
CELVIN® NAS Server Q802
Technical specifications
Firmware based on 3.7.3
Processor: Intel® Atom™ D270x 2,1GHz
Memory: 1 GB DDRIII RAM
512 MB Flash on DOM
FAN:1x quiet cooling fan (9cm)
Intel® 82574L NIC x2 Gigabit LAN
Formfactor: Tower
Processor: Intel® Atom™ D270x 2,1GHz
Memory: 1 GB DDRIII RAM
512 MB Flash on DOM
FAN:1x quiet cooling fan (9cm)
Intel® 82574L NIC x2 Gigabit LAN
Formfactor: Tower
Hard disk capacity
Up to 4 x 2.5-inch or 3.5-inch SATA I/II/SATA 6Gb/s HDD or SSD up to 12TB raw capacity, consult HDD compatibility list
Required interface
Ethernet plug
LED
USB
Status
HDD 1 -4
LAN
Power
Status
HDD 1 -4
LAN
Power
System controls
Power button, One-touch copy button, Alarm Buzzer (System Warning), Reset Button, Display mode button
Color
Black housing, copper colored trays
Software specification
Networking
TCP/IP (IPv4 /IPv6 dual stack), multi IP setting,LACP,
Port trunking /NIC teaming:
Balance-rr (Round-Robin), Active Backup, Balance XOR, Broadcast, IEEE 802.3ad,
Balance-tlb (Adaptive, Transmit Load Balancing), Balance-alb (Adaptive Load Balancing)
DHCP client, DHCP server including PXE boot
CIFS/SMB, AFP/Netatalk3.2, NFS v3, HTTP, HTTPS, FTP,SFTP(admin), DDNS, NTP, Telnet, SSH, iSCSI, SNMP,WebDAV,SMSC
Dual Gigabit w/ Jumbo Frame, Bonjour
iSCSI initiator for virtual disks (max 8 disks); stack chaining master
Virtual disk support for EXT3/ EXT4/ NTFS/ FAT32/ HFS+
Support for VMware VSphere 4 and 5 via NFS and iSCSI
Windows Server 2008 support (Hyper-V & failover clustering)
Citrix XenServer (6.0)
iSCSI target (with multi-LUNs per target)
iSCSI LUN online expansion
LUN mapping / LUN masking
Up to 256 LUNs
SCSI Primary Commands -3 (SPC-3) support / persistent reservation
MC/S (multiple TCP connections / session) support to reach iSCSI target
MPIO (multipath input output) for load balancing and failover
VLAN 802.1Q
USB WiFi-Adapter support IEEE 802.11b/g/n
WEP, WPA-personal (AES/TKIP), WPA2-personal (AES)
Connection to wireless network or Ad Hoc network
Port trunking /NIC teaming:
Balance-rr (Round-Robin), Active Backup, Balance XOR, Broadcast, IEEE 802.3ad,
Balance-tlb (Adaptive, Transmit Load Balancing), Balance-alb (Adaptive Load Balancing)
DHCP client, DHCP server including PXE boot
CIFS/SMB, AFP/Netatalk3.2, NFS v3, HTTP, HTTPS, FTP,SFTP(admin), DDNS, NTP, Telnet, SSH, iSCSI, SNMP,WebDAV,SMSC
Dual Gigabit w/ Jumbo Frame, Bonjour
iSCSI initiator for virtual disks (max 8 disks); stack chaining master
Virtual disk support for EXT3/ EXT4/ NTFS/ FAT32/ HFS+
Support for VMware VSphere 4 and 5 via NFS and iSCSI
Windows Server 2008 support (Hyper-V & failover clustering)
Citrix XenServer (6.0)
iSCSI target (with multi-LUNs per target)
iSCSI LUN online expansion
LUN mapping / LUN masking
Up to 256 LUNs
SCSI Primary Commands -3 (SPC-3) support / persistent reservation
MC/S (multiple TCP connections / session) support to reach iSCSI target
MPIO (multipath input output) for load balancing and failover
VLAN 802.1Q
USB WiFi-Adapter support IEEE 802.11b/g/n
WEP, WPA-personal (AES/TKIP), WPA2-personal (AES)
Connection to wireless network or Ad Hoc network