WatchGuard Ethernet Power Injector WG8568 User Manual

To connect an Ethernet Power Injector to the WatchGuard AP device:

1. Attach a region-specific plug to the Ethernet Power Injector.

2. Plug the Ethernet Power Injector into an AC power source.

3. Connect a straight-through Ethernet cable from your network backbone (for 

example, a router, switch, or hub) to the IN connector on the Ethernet Power Injector.

4. Connect a straight-through Ethernet cable from the WatchGuard AP device Ethernet 

interface to the OUT connector on the Ethernet Power Injector.

WG003000

IEEE 802.3af

100 to 240VAC

56V

15.4W

In: RJ-45 for 10/100 Mbps
Out: RJ-45 for 10/100 Mbps and 56V DC
Voltage on pins 4-5 (+) and 7-8 (-).

US, EU, UK, AU