WatchGuard Ethernet Power Injector WG8568 User Manual
Product codes
WG8568
5
T-rail Mounting Instructions
To mount your WatchGuard AP device on a suspended ceiling, you can use one of the two
T-rail connectors included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm). Before you mount your WatchGuard AP device, make sure you select the correct
T-rail connector size.
T-rail connectors included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm). Before you mount your WatchGuard AP device, make sure you select the correct
T-rail connector size.
If you require additional space between the device and the ceiling, you can use the provided
spacers and long 6x25 screws.
spacers and long 6x25 screws.
To mount the device on a suspended ceiling with the T-rail connectors:
1. Attach the T-rail connectors to the bottom of the WatchGuard AP device with the
short 6x10 screws.