Manualsbrain.com
  1. Manuals
  2. Brands
  3. Zebra
  4. HW46211
  5. User Manual

Zebra HW46211 User Manual

Download
Page of 275
Page 4-14
110XiIIIPlus Maintenance Manual
13185L-002 Rev. A  1/24/06
Section 4
Maintenance
Routine Referral Procedures (RRP)
Routine Referral Procedures are commonly used steps that are performed often during 
corrective maintenance. These procedures are referenced throughout this section of the 
manual.
RRP No. 1: Prepare Printer for Maintenance
Remove Power and Disconnect Printer
Refer to 
1. Turn the printer Off (O).
2. Remove the AC power cord.
Refer to 
3. Parallel Data Cable: Remove wire retainers from the parallel data cable connector. 
Pull the data cable connector away from the parallel data port connector.
4. Serial Data Cable: Loosen the screws securing serial data cable connector and pull 
it away from the serial data port connector.
5. USB Data Cable: Pull the USB connector away from the USB connector. 
Figure 4-5.   Power Cord Removal and Installation
Caution:
Unless indicated otherwise, turn the printer Off (O) and disconnect the printer 
from the power source before performing the following maintenance.
AC Power
Switch
l = On
O = Off
AC Power
Cord Connection
AC Power Cord
Power Socket