Zebra HW46211 User Manual

13185L-002 Rev. A  1/24/06

110XiIIIPlus Maintenance Manual

Page 4-41

Maintenance

Section 4

Peel-Off Mode

In Peel-Off Mode, the lower roller alignment has the same effect on media tracking as the 

rewind plate alignment does in Rewind Mode. Refer to 

following procedure.

1. Loosen the two screws that secure the platen support bracket to the side plate.

2. Adjust the bracket position as required and tighten the screws.

3. Run test labels and repeat the adjustment until the required results are achieved.

Lower Platen

Roller

Mounting
Screws

Platen Support
Bracket

Bearing

Bearing

Note • Moving the bracket toward the front of the machine moves the label liner 
away from the rewind tracking plate. Moving the bracket toward the rear of the 
machine moves the liner toward the tracking plate.