Zebra HW46211 User Manual
Page 1-6
110XiIIIPlus Maintenance Manual
13185L-002 Rev. A 1/24/06
Section 1
System Description
Media Considerations
Media Specifications
In inches (mm)
Minimum label length
Tear-off
0.7 (18)
Peel-off
0.5 (13)
Cutter
1.5 (38)
Rewind
0.25 (6)
Total media width
(includes liner)
(includes liner)
Minimum
0.79 (20)
Maximum
4.5 (114)
Total thickness
(includes liner)
(includes liner)
Minimum
0.003 (0.076)
Maximum
0.012 (0.305)
Cutter maximum full-width
media thickness
media thickness
0.009 (0.23)
Roll media core diameter
3 (76)
Maximum roll diameter
8 (203)
Interlabel gap
Minimum
0.079 (2)
Preferred
0.118 (3)
Maximum
0.157 (4)
Maximum internal fanfold media pack size
(label + liner) L × W × H
(label + liner) L × W × H
8.0 × 3.54 × 4.5 (203 × 140 × 114)
Ticket/tag sensing notch L × W
0.12 × 0.25 (3 × 6)
Ticket/tag sensing hole diameter
0.125 (3)
Effective leading edge
registration accuracy*
registration accuracy*
Vertical
±0.060 (±1.5)
Horizontal
±0.060 (±1.5)
Additional
specs for
black mark
sensing
specs for
black mark
sensing
Mark length
(measuring
parallel to label/tag
edge)
(measuring
parallel to label/tag
edge)
Minimum
0.12 (3)
Maximum
0.43 (11)
Mark width
(measuring
perpendicular to
label/tag edge)
(measuring
perpendicular to
label/tag edge)
Minimum
0.43 (11)
Maximum
Full media width
Mark location
Marks must be located within 0.040 (1)
of inside media edge.
of inside media edge.
Mark density
> 1.0 ODU (Optical Density Unit)
Maximum density of liner on which
black mark is printed
black mark is printed
0.5 ODU
* Media registration and minimum label length are affected by media type and width,
ribbon type, print speed, and printer mode of operation. Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with thorough
testing.
ribbon type, print speed, and printer mode of operation. Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with thorough
testing.