Zebra HW46211 User Manual
Page 2-6
110XiIIIPlus Maintenance Manual
13185L-002 Rev. A 1/24/06
Section 2
Operations Overview
Front Panel Keys
Refer to
Table 2-1. Front Panel Keys
Key
Function
Starts and stops the printing process.
•
•
If the printer is not printing: no printing can occur.
•
If the printer is printing: printing stops once the current label is complete.
•
Press to remove error messages from the display.
Forces the printer to feed one blank label each time the key is pressed.
•
•
Printer not printing: one blank label immediately feeds.
•
Printing: one blank label feeds after the current batch of labels is
complete.
complete.
When in Pause Mode, this key cancels print jobs.
•
•
Print job in queue: press once for each print job to be deleted.
•
Press and hold for several seconds to cancel all print jobs in the
printer’s memory. The DATA light turns off.
printer’s memory. The DATA light turns off.
When in Pause Mode, this key calibrates the printer for:
•
•
Media length.
•
Media type (continuous or non-continuous).
•
Print mode (Direct Thermal or Thermal Transfer).
•
Sensor values.
•
Scrolls back to previous parameter.
•
Press and hold to go backward quickly through parameter sets.
•
Scrolls forward to the next parameter. Saves any changes made in the
configuration and calibration sequence.
configuration and calibration sequence.
•
Press and hold to advance quickly through parameter sets.
Note • Pause Mode can also be activated via ZPL II (~PP, ^PP).
Note • Equivalent to the Slew to Home Position (~PH, ^PH) ZPL II instruction.
Note • The following keys are used only when configuring the printer. Specific
uses of these keys are explained in the Configuration section of the
Users Guide.
uses of these keys are explained in the Configuration section of the
Users Guide.