Zebra HW46211 User Manual
13185L-002 Rev. A 1/24/06
110XiIIIPlus Maintenance Manual
Page 2-9
Operations Overview
Section 2
Load Media
Tear-Off Mode
Refer to
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer frame as
possible. Flip down the media supply guide.
3. Load media as shown.
4. Flip up the media supply guide. Slide in the media guide and media supply guide so
they just touch, but do not restrict, the edge of the roll.
5. Close the printhead.
Figure 2-5. Roll Media Loading Tear-Off Mode
Note • A calibration must be performed when media and ribbon are first
installed in the printer, or when there is a change to a different type of media or
ribbon.
installed in the printer, or when there is a change to a different type of media or
ribbon.
Media
Guide
Media
Media Supply
Guide
Closed
Open
Printhead Lever