Zebra HW46211 User Manual
Page 2-18
110XiIIIPlus Maintenance Manual
13185L-002 Rev. A 1/24/06
Section 2
Operations Overview
Position Media Sensors
Transmissive Sensor
The web or gap sensor, better known as the transmissive sensor, detects the gap or hole/
notch between labels.
The transmissive sensor consists of two parts: a light source (the lower media sensor) and
a light sensor (the upper media sensor). The media passes between the two.
The upper media sensor must be positioned:
•
Directly over the hole or notch, or
•
Anywhere along the width of the media if there is a gap between labels.
Figure 2-15. Upper Media Sensor
Note • If you are using continuous media, position the upper media sensor over
the media to detect an out-of-paper condition.
the media to detect an out-of-paper condition.
Upper Media Sensor
Adjustment
Adjustment