Zebra HW46211 User Manual

Page 2-42

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A 1/24/06

Section 2

Operations Overview

Set Label Top Position

The label top position controls the initial vertical print position on the label (viewed as the 

label exits the printer). The reference default position is to 2 mm below the leading edge of 

the label that follows the one to be printed. Refer to 

. If there is a lengthy web 

between labels, the label format may begin printing on the liner. To set the position where 

the format begins printing, change the label top position value.

Press the right oval key to increase the value, or press the left oval key to decrease the 

value. Each positive number moves the label top position down by one dot row; each 

negative number moves the position up by one dot row.

Press NEXT/SAVE to display LEFT POSITION.

Default: +0

Range: –120 to +120

LABEL TOP

-

+