Juniper PF-BLANK User Manual
•
You can install any 100-Gigabit Ethernet CFP transceiver supported by the PIC.
•
100GBASE-LR4 (model number: CFP-100GBASE-LR4)
•
Duplex SC connector (RX and TX)
•
Junos OS Release 12.1 and later
•
100GBASE-ER4 (model number: CFP-100GBASE-ER4)
•
Duplex LC connector (RX and TX)
•
Junos OS Release 12.3 and later
•
100GBASE-SR10 (model number: CFP-100GBASE-SR10)
•
24-fiber MPO
•
Junos OS Release 12.3 and later
•
Optical interface specifications—see 100-Gigabit Ethernet 100GBASE-R Optical Interface
Specifications
Specifications
Cables and connectors
Type 5 PIC LEDs
•
PIC STATUS
LED:
•
Off—PIC is powered down and offline
•
Green—PIC is online with all voltages in range
•
Yellow—PIC is initializing
•
Red—PIC has an error or failure
•
Link
STATUS
LED:
•
Off—Port is off
•
Green—Port is online and link is up
•
Red—Port detecting failure with alarms
•
Link
ACTIVITY
LED:
•
Off—No link activity
•
Flashing green—Indicates link activity for the port
Type 4 PIC LEDs
•
Two tricolor
STATUS
LEDs (
P1C 0
and
P1C 1
)
•
Green—PIC is online with no alarms or failures
•
Yellow—PIC is initializing
•
Red—PIC has a remote or local fault
•
Off—PIC is not enabled
•
RX LED (
P1C 1
):
•
Green—Port is receiving data
•
Off—Port might be on, but there is a local or remote fault
•
TX LED (
P1C 1
):
•
Green—Port is transmitting data
•
Off—Port might be on, but there is a local fault
LEDs
Copyright © 2013, Juniper Networks, Inc.
96
T4000 Core Router Interface Module Reference