Intel SSD 525 90GB SSDMCEAC090B301 User Manual
Product codes
SSDMCEAC090B301
Intel® Solid-State Drive 525 Series
Intel® Solid-State Drive 525 Series
December 2012
Product Specification
Order Number: 328354-001US
13
5.0
Supported Command Sets
The Intel SSD 525 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial
ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and
optional commands are defined in this section.
5.1
ATA General Feature Command Set
General Feature command set (non-PACKET), which consists of:
• EXECUTE DEVICE DIAGNOSTIC
• FLUSH CACHE
• IDENTIFY DEVICE
• FLUSH CACHE
• IDENTIFY DEVICE
Note: See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
• READ DMA
• READ SECTOR(S)
• READ VERIFY SECTOR(S)
• SEEK
• SET FEATURES
• WRITE DMA
• WRITE SECTOR(S)
• READ MULTIPLE
• SET MULTIPLE MODE
• WRITE MULTIPLE
• READ SECTOR(S)
• READ VERIFY SECTOR(S)
• SEEK
• SET FEATURES
• WRITE DMA
• WRITE SECTOR(S)
• READ MULTIPLE
• SET MULTIPLE MODE
• WRITE MULTIPLE
The Intel SSD 525 Series also supports the following optional commands:
• READ BUFFFER
• WRITE BUFFER
• NOP
• DOWNLOAD MICROCODE
• WRITE BUFFER
• NOP
• DOWNLOAD MICROCODE
5.2
Power Management
The Intel SSD 525 Series supports several power management feature sets as defined by the ATA
specification: general Power Management feature set, Advanced Power Management feature set, and
Power-Up In Standby (PUIS) feature set.
The Advanced Power Management and PUIS features can be enabled or disabled using the SET
FEATURES command.
The Power Management feature set includes the following commands:
• CHECK POWER MODE
• IDLE
• IDLE IMMEDIATE
• SLEEP
• STANDBY
• STANDBY IMMEDIATE
• IDLE
• IDLE IMMEDIATE
• SLEEP
• STANDBY
• STANDBY IMMEDIATE