D-Link DHP-W310AV DHP-W310AV/B User Manual

This section will show you how to configure your new D-Link Powerline AV using the web-based configuration utility.

Power save mode.

You can set the name of your network and to make 

it either public or private. Make sure the Network 

Name of all of the devices within your Powerline 

network is the same.

Select this option if you would like to make 

your Powerline network public with the default 

Network Name of “HomePlugAV”. Since this is a 

commonly used Network Name, it is less secure 

than a private Network Name. 

Select this option if you wish to make your 

Powerline network more secure by using a private 

Network Name. 

Click this button to scan for new Powerline devices. 

This is automatically done periodically and upon 

loading this page.

This section provides information on the Powerline 

AV devices on your Powerline network.

Here  you  can  set  the  Quality  of  Service  (QoS) 

settings for each network device. QoS helps you 

prioritize network traffic based on device or the 

port the traffic is on.

Select a device from the Computer Name dropdown box and then click the << above Computer Name to automatically fill in 

the device’s MAC Address. Or,  Set the priority for the device under the Priority dropdown box. Clear settings for a rule with the 

Clear button. Remember to click Save Settings after making changes.