ASUS P8H61-M LK R2.0 90MB0E50-M0EAY0 User Manual

Product codes
90MB0E50-M0EAY0
Page of 73
ASUS P8H61-M LK R2.0
2-25
Next boot after AC Power Loss [Normal Boot]
[Normal Boot]  Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] 
Accelerates the boot speed on the next boot after an AC power loss. 
2.7.2 
Full Screen Logo [Enabled]
[Enabled] 
Enables the full screen logo display feature.
[Disabled] 
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. 
Post Logo Delay Time [3 sec]
Allows you to set the waiting time for the system to display the post logo. Configuration 
options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] 
2.7.3 
Bootup NumLock State [On]
[On] 
Sets the power-on state of the NumLock to [On].
[Off] 
Sets the power-on state of the NumLock to [Off].
2.7.4 
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error 
occurs. Configuration options: [Disabled] [Enabled]
2.7.5 
Option ROM Messages [Force BIOS]
[Force BIOS] 
The third-party ROM messages will be forced to display during the boot 
sequence. 
[Keep Current]  The third-party ROM messages will be displayed only if the third-party 
manufacturer had set the add-on device to do so. 
2.7.6 
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup 
program.
[EZ Mode] 
Sets EZ Mode as the default screen for entering the BIOS setup program.
2.7.7 
CSM (Compatibility Support Module)
This option controls whether or not CSM will be launched.
Launch CSM [Auto]
Configuration option: [Auto] [Enabled] [Disabled]
The following four items appear only when you set Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpROM]
Configuration option: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]