Bosch ISW-BSR1-WX F.01U.028.249 User Manual
Product codes
F.01U.028.249
Intrusion Alarm Systems | wLSN Siren (Indoor)
wLSN Siren (Indoor)
www.boschsecurity.com
u
Siren with an output level of 85 dBA at 3 m (10 ft)
u
Wiring terminals for connection of optional alternate
power source (6 VDC to 14 VDC)
power source (6 VDC to 14 VDC)
u
Externally-visible LED indicates test status and RF
signal strength
signal strength
u
Determine suitability of chosen installation location
with RF Signal Strength (RFSS) mode
with RF Signal Strength (RFSS) mode
u
Supervised for low-battery, cover-tamper, and wall-
tamper conditions
tamper conditions
The wLSN Siren (Indoor) is a wireless sounding de-
vice. The wireless Local SecurityNetwork (wLSN) pro-
tocol synchronizes multiple output devices in the same
system so that they all sound together using the same
cadence.
vice. The wireless Local SecurityNetwork (wLSN) pro-
tocol synchronizes multiple output devices in the same
system so that they all sound together using the same
cadence.
Functions
Alternate Power Supply
An optional alternate external 6 VDC to 14 VDC power
supply can be connected to the siren. The alternate
power supply is used as a supplemental supply to
power the siren.
supply can be connected to the siren. The alternate
power supply is used as a supplemental supply to
power the siren.
Notice
Do not operate the wLSN Siren without batteries.
Do not operate the wLSN Siren without batteries.
RF Signal Strength Mode
Removing the device cover and pressing the tamper
switch four times within 10 seconds of battery installa-
tion activates the RF signal strength mode. The LED
lights steady for 5 sec and then begins to flash. A slow
flash (approximately 1 sec on, 1 sec off) indicates in-
sufficient signal reception. A quickly flashing LED (ap-
proximately five times as fast as the slow flash) indi-
cates the device is receiving sufficient signal from the
wLSN Hub.
switch four times within 10 seconds of battery installa-
tion activates the RF signal strength mode. The LED
lights steady for 5 sec and then begins to flash. A slow
flash (approximately 1 sec on, 1 sec off) indicates in-
sufficient signal reception. A quickly flashing LED (ap-
proximately five times as fast as the slow flash) indi-
cates the device is receiving sufficient signal from the
wLSN Hub.
Use an an Alerting Device
The wLSN Siren produces an output level of 85 dB at
3 m (10 ft); thereby meeting the requirements of most
certifying agencies for use as an alerting device. Verify
that it meets the requirements of the local authority
having jurisdiction (AHJ).
3 m (10 ft); thereby meeting the requirements of most
certifying agencies for use as an alerting device. Verify
that it meets the requirements of the local authority
having jurisdiction (AHJ).
Certifications and Approvals
Listings and Approvals:
Complies with:
EN50131-1 Grade 2, Environmental class
II
Region
Certification
Europe
CE
1999/5/EC, IEC60950-1: 2001,
EN60950-1:2001 +A11:2004,
EN50130-4: 1996 +A1: 1998 +A2:
2003, EN61000-4-2: 1995 +A1: 1998
+A2: 2001, EN61000-4-3: 2002 +A1:
2003 +A2: 2005, EN61000-4-4: 1995
+A1: 2001 +A2: 2001, EN61000-4-5:
1995 +A1: 2001, EN61000-4-6: 1996
+A1: 2001 +A2: 2001 +A3: 2005,
EN61000-4-11: 1994 +A1: 2001,
EN55022/ANSI C63.4: 2003, ETSI EN
300 220-1 V1.3.1: 2000-09, ETSI EN
301 489-1 V1.4.1: 2002-08, ETSI EN
301 489-3 V1.4.1: 2002-08
Belgium
INCERT
B-509-0058