Bosch ITS-DX4020-G F.01U.082.094 User Manual
Product codes
F.01U.082.094
Intrusion Alarm Systems | ITS-DX4020-G GPRS/GSM Communicator
ITS-DX4020-G GPRS/GSM Communicator
www.boschsecurity.com
u
Secure IP communication from compatible Bosch
panels to Bosch receivers
panels to Bosch receivers
u
Remote programming of IP compatible Bosch panels
u
GSM reporting from Contact ID control panels to
any PSTN receiver
any PSTN receiver
u
Easy provisioning using SMS (text) or USB
u
Easy installation, troubleshooting, and maintenance
The ITS-DX4020-G enables two-way IP or dialed
communications over a commercial GPRS/GSM
network. Typical functions are event reporting to a
central monitoring station and remote access to Bosch
control panels.
The ITS-DX4020-G is built for a wide variety of secure
commercial and industrial applications. Flexible end-
to-end path supervision, the 128 bit AES encryption
and anti-substitution features make ITS-DX4020-G
desirable for high security and fire monitoring
applications. It is capable as a stand-alone wireless
path for customers cancelling PSTN service or it can
be used in conjunction with another communication
technology. For Fire Monitoring applications, theITS-
DX4020-G meets UL864 and NFPA72 standards for
Single Communication Technology by annunciating a
path failure at the Central Station within 5 minutes.
For installations using a PSTN receiver, the ITS-
DX4020-G can be wired to the control panel’s phone
output and send Contact ID alarms over the GSM voice
channel.
Note: GPRS capability requires an appropriate data
plan from a cellular provider.
communications over a commercial GPRS/GSM
network. Typical functions are event reporting to a
central monitoring station and remote access to Bosch
control panels.
The ITS-DX4020-G is built for a wide variety of secure
commercial and industrial applications. Flexible end-
to-end path supervision, the 128 bit AES encryption
and anti-substitution features make ITS-DX4020-G
desirable for high security and fire monitoring
applications. It is capable as a stand-alone wireless
path for customers cancelling PSTN service or it can
be used in conjunction with another communication
technology. For Fire Monitoring applications, theITS-
DX4020-G meets UL864 and NFPA72 standards for
Single Communication Technology by annunciating a
path failure at the Central Station within 5 minutes.
For installations using a PSTN receiver, the ITS-
DX4020-G can be wired to the control panel’s phone
output and send Contact ID alarms over the GSM voice
channel.
Note: GPRS capability requires an appropriate data
plan from a cellular provider.
System overview