Cisco TRC5 CTS-RMT-TRC5= User Manual

18

Deployment Details

August 2012 Series

18

Step 3:  

Create the rest of the subzones that your organization needs by 

repeating Step 1 and Step 2.

Subzone membership rules are used to assign endpoints to the correct 
subzones. The easiest way to match the endpoints is IP address subnet 
ranges. Two membership rules are created for the HQ site to account for the 
endpoints in the access subnet at 10.4.0.0/24 and Cisco MCU in the server 
room subnet at 10.4.48.0/24. 

The address range for the membership rules must correspond 
with the specified site.

Step 4:  

Navigate to 

VCS configuration > Local Zone > Subzone member-

ship rules

, and then click 

New.

Step 5:  

On the 

Create membership rule

 page, enter the following values, 

and then click 

Create rule

:

•  Rule name—

RL_HQ

•  Description—

Subnet Rule for HQ

•  Priority—

100

 (default)

•  Type—

Subnet

•  Subnet address—

10.4.0.0

•  Prefix length—

17

•  Target subzone—

SZ_HQ

•  State

—

Enabled

Step 6:  

Create the rest of the membership rules for your organization by 

repeating Step 4 and Step 5 using the appropriate information for each 
subnet.