Cisco TRC5 CTS-RMT-TRC5= User Manual

Product codes
CTS-RMT-TRC5=
Page of 45
20
Deployment Details
August 2012 Series
20
Figure 5 - Relationship between pipes, links, and subzones in Cisco VCS
1067
VCSc1
Local Zone
Default
Subzone
Traversal
Subzone
SZ_Remote_1
10.5.0.0/21
SZ_Remote_2
10.5.80.0/21
SZ_HQ
10.4.0.0/17
LK_HQ-R
1
LK_HQ-R2
LK_R
1-R2
PP_R1
384K
PP_R2
384K
PP_HQ
1536K
Procedure 1 
Create pipes
Step 1:  
Navigate to 
VCS configuration > Bandwidth > Pipes
, and then click 
New
.
Step 2:  
On the Create pipe page, enter the following values, and then click 
Create pipe
:
•  Name—
PP_HQ
•  Bandwidth restriction—
Limited
 
•  Total bandwidth limit—
1536
(four calls in and out of HQ)
•  Bandwidth restriction—
Limited
 
•  Per call bandwidth—
384
Step 3:  
On the Pipes page, click 
New
.
Step 4:  
On the Create pipe page, enter the following values, and then click 
Create pipe
:
•  Name—
PP_R1
•  Bandwidth restriction—
Limited
 
•  Total bandwidth limit—
384
(one call in and out of remote sites).
•  Bandwidth restriction—
Limited
 
•  Per call bandwidth—
384
Step 5:  
Create the rest of the pipes that your organization needs by repeat-
ing Step 3 and Step 4 using the appropriate information for each site.
Procedure 2 
Create links
Cisco VCS creates a number of default links when new subzones are cre-
ated. Before you create the new links, you must delete the subzone default 
links. Do not delete the default link that was automatically created between 
the traversal subzone and the default zone.