Cisco TRC5 CTS-RMT-TRC5= User Manual

Product codes
CTS-RMT-TRC5=
Page of 45
24
Deployment Details
August 2012 Series
24
Procedure 3 
Configure the Cisco MCU
The rest of the configuration of the Cisco MCU is done using a standard web 
browser. You use the information collected in Table 3 at the beginning of this 
Cisco MCU configuration process to fill in the fields.
Step 1:  
Open a browser window, and enter the IP address of the Cisco 
MCU: 
10.4.48.135
Step 2:  
Click 
Log in
, enter the following values, and then click 
OK:
•  Username—
admin
•  Password—(leave the 
password
 field blank)
Step 3:  
On the Login information screen, click 
Change password
.
Step 4:  
On the Change password screen, enter the following values, and 
then click 
OK
.
•  Old password—(leave the 
Old password
 field blank)
•  New password—
[password]
•  Re-enter password—
[password]
Step 5:  
Navigate to 
Network > DNS
, enter the following values, and then 
click 
Update DNS configuration
:
•  DNS configuration—
Manual
•  Host name—
MCU
•  Name server—
10.4.48.10
•  Domain name (DNS suffix)—
cisco.local
Step 6:  
Navigate to 
Settings > Time
, select 
Enable NTP
, enter the following 
values, and then click 
Update NTP settings
:
•  UTC offset— 
-7
•  NTP host IP address—
10.4.48.17
Step 7:  
Navigate to 
Network > SNMP
, enter the following values, and then 
click 
Update SNMP settings
:
•  Name—
MCU
•  Location—
San Jose, CA
(optional) 
•  Contact—
John Smith
(optional) 
•  RO community—
cisco
•  RW community—
cisco123
•  Trap community—
cisco