Metra 99-7803G User Manual

1.  Unsnap and remove shift lever trim 

ring.  (Figure A)

2.  Unsnap coin tray/ashtray from 

assembly and remove. Rubber 

cover may come out first but entire 

assembly must be removed to 

access screws below.  (Figure B)

3.  Remove (2) Phillips screws from 

under coin tray/ashtray and 

remove entire assembly.  (Figure C)

4.  Remove (2) Phillips screws from 

bottom of pocket assembly and 

unsnap and remove.  (Figure D)

5.  Remove (2) Phillips screws facing 

up under radio/climate control 

assembly.)  (Figure E)

6.  Push and hold the hazard button 

down. Carefully insert a flat blade 

screwdriver into the slot below the 

button and push down to release 

the center clip.  (Figure F)