Metra 99-7803G User Manual

ISO DIN head unit provisions
1.  Mount the pocket to the radio 

brackets with four of the supplied 

#8 x 3/8” Phillips screws.  (Figure A)

2.  Mount the radio brackets to the 

radio trim panel with four of the 

supplied #8 screws.  (Figure A)

 

Double DIN head unit provisions
3.  Mount the (2) panel clip legs to the 

radio trim panel with the provided 

(4) #4 Phillips screws. Attach the 

(2) panel clips to the legs.   

(Figure B)

4.  Locate the factory wiring harness 

and antenna plug in the dash. 

Refer to the wiring section of  

this manual. 

5.  Mount the new aftermarket radio 

assembly into the dash and 

reassemble dash in reverse order 

of disassembly. 

Clip leg locations

Step 1.

Step 2