HP RP7 7100 D3H26UT User Manual

Product codes
D3H26UT
Page of 23
Battery type: Lithium
Additional Information
This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive
– 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic Equipment
(WEEE) Directive – 2002/96/EC.
This product is in compliance with California Proposition 65 (State of California; Safe Drinking
Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold where HP
registers commercial desktop products. See 
 for registration status in
your country.
Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and
ISO1043.
This product contains 28.7% post consumer recycled plastic (by wt.)
This product is 96.2% recyclable when properly disposed of at end of life.
Packaging Materials
External:
PAPER/Corrugated – 2862.3 g
Internal:
PLASTIC/Polyethylene high density – 42.2 g
PLASTIC/EPE-Expanded Polyethylene – 1745 g
The PAPER/Corrugated packaging material is made from 24% recycled content.
The PLASTIC/Polyethylene high density packaging material is made from 1.8% recycled
content.
The PLASTIC/EPE-Expanded Polyethylene packaging material is made from 1.8% recycled
content.
RoHS Compliance
Hewlett-Packard is committed to compliance with all applicable environmental laws and
regulations, including the European Union Restriction of Hazardous Substances (RoHS) Directive.
HP's goal is to exceed compliance obligations by meeting the requirements of the RoHS Directive on
a worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to
levels below legal limits) for all HP electronic products subject to the RoHS Directive, except where
it is widely recognized that there is no technically feasible alternative (as indicated by an exemption
under the EU RoHS Directive).
Material Usage
This product does not contain any of the following substances in excess of regulatory limits (refer
to the HP General Specification for the Environment at:
):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
QuickSpecs
HP RP7 Retail System, Model 7100
Environmental
DA - 14462   North America — Version 6 — August 12, 2013
Page  20