Philips Pressurised steam generator GC9241/02 GC9241/02 User Manual

By using ECO mode (reduced amount of steam), you can save energy 

without compromising on the ironing result.

 1 

 To activate the ECO mode, press and hold the on/off button for  

2 seconds. The light turns green.

 2 

  To switch back to the ‘OptimalTemp’ setting, switch the steam 

generator off and on again. 

The Safety Auto-off function automatically switches off the appliance if  

it has not been used for 10 minutes, to save energy.

To ensure a long life for your steam generator, it is very important that 

you perform the descaling procedure when the EASY DE-CALC light 

starts to flash. 

 - The EASY DE-CALC light starts flashing after approx. one month or 

10 ironing sessions to indicate that the steam generator needs to be 

descaled. To descale the steam generator, perform the steps below. 

Never remove the EASY DE-CALC knob when the steam generator  

is hot.

 1 

 Press the on/off button to switch off the steam generator and 

remove the plug from the wall socket.

 2 

 Place the steam generator on a stable table with the EASY  

DE-CALC knob sticking out beyond the edge of the table or  

take the steam generator to a sink. 

 3 

 Hold a cup under the EASY DE-CALC knob. Turn the EASY  

DE-CALC knob anti-clockwise and let the water with scale particles 

flow into the cup. When no more water comes out of the steam 

generator, reinsert the EASY DE-CALC knob. Turn the knob 

clockwise to fasten it and put the plug back into the socket again.

You can now use the steam generator again.

9