OCZ Technology SSD Upgrade Kit SSD-KIT User Manual

SOLID STATE DRIVE UPGRADE KIT FOR WINDOWS®

OCZ’s Solid State Drive Upgrade Kit provides a simple and efficient solution for 
swapping out your hard drive with a high performance solid state drive.  The cloning 
software effortlessly migrates your entire hard drive (operating system, applications 
and data) onto your SSD, ensuring a smooth transition into the world of solid state 
drives.

Note:  The following instructions provide a general guideline for preparing your SSD for the cloning 
process. For further, detailed installation instructions, please refer to the user’s manual located on 
the CD. If the target drive is a Vertex 4 or Agility 4 SSD, you MUST use the “Cloning your HDD onto the 
SSD (w/bootable CD)” method in this guide.

 

•  OCZ 2.5” to 3.5” Adapter Bracket 
•  OCZ 2.5” External Drive Enclosure 
•  Mounting Screws 
•  SATA III 6Gbp/s Data Cable
•  Dual USB 2.0 Cable
•  Acronis True Image HD Software CD w/ Activation Key  

1.  Insert the software CD into your CD-ROM Drive.
2.  Run the .exe setup file on the CD.
3.  Follow on the on-screen instructions to install the software.
4.  Start the application and enter the Activation Key (included) when prompted.

Note: If the target drive is a Vertex 4 or Agility 4 SSD, you MUST use the “Cloning your HDD onto the 
SSD (w/bootable CD)” method in this guide.

Caution:  Do not power down your system during the cloning process. Doing so can result in 
unwanted changes to your computer’s settings.

1.  Open the external enclosure and install the SSD by carefully aligning and 
     connecting the SSD with the SATA connectors within the case. Close and the secure  
     the enclosure.

ISF-UPGRADEKIT

ACTIVATION KEY