Intel i3-3130M AW8063801111500 User Manual

Product codes

AW8063801111500

Datasheet, Volume 1

Interfaces

This chapter describes the interfaces supported by the processor.

2.1

System Memory Interface

2.1.1

System Memory Technology Supported

The Integrated Memory Controller (IMC) supports DDR3 / DDR3L protocols with two
independent, 64-bit wide channels, each accessing one or two DIMMs. The type of
memory supported by the processor is dependant on the PCH SKU in the target
platform. Refer to

Chapter

for supported memory configuration details.

Note:

The processor supports only JEDEC approved memory modules and devices.

Note:

The IMC supports a maximum of two DIMMs per channel; thus, allowing up to four

device ranks per channel.

Note:

The supported memory interface frequencies and number of DIMMs per channel are

SKU dependent.

Note:

There is no support for DDR3L DIMMs/DRAMS running at 1.35

• DDR3 / DDR3L

at 1.5

V Data Transfer Rates

— 1333 MT/s (PC3-10600), 1600 MT/s (PC3-12800)

• DDR3 / DDR3L at 1.5

V SO-DIMM Modules

— Raw Card A – Dual Ranked x16 unbuffered non-ECC

— Raw Card B – Single Ranked x8 unbuffered non-ECC

— Raw Card C – Single Ranked x16 unbuffered non-ECC

— Raw Card F – Dual Ranked x8 (planar) unbuffered non-ECC

• Desktop platform DDR3/DDR3L at 1.5

V UDIMM Modules

— Raw Card A – Single Ranked x8 unbuffered non-ECC
— Raw Card B – Dual Ranked x8 unbuffered non-ECC
— Raw Card C – Single Ranked x16 unbuffered non-ECC

Note:

The processor supports memory configurations that mix DDR3 DIMMs / DRAMs with

DDR3L DIMMs / DRAMs running at 1.5

Table 2-1.

Processor DIMM Support Summary by Product

Processor

cores

Package

DIMM per

channel

DIMM type

DDR3

DDR3L at 1.5 V

Dual Core,
Quad Core

uLGA

1 DPC

SO-DIMM

1333/1600

2 DPC

1333,1600

1333/1600

Dual Core,
Quad Core

uLGA

1 DPC

UDIMM

1333/1600

2 DPC

1333/1600