Intel i3-3130M AW8063801111500 User Manual

Product codes
AW8063801111500
Page of 112
Datasheet, Volume 1
25
Interfaces 
Note:
1.
System memory timing support is based on availability and is subject to change.
2.1.3
System Memory Organization Modes
The IMC supports two memory organization modes, single-channel and dual-channel. 
Depending upon how the DIMM Modules are populated in each memory channel, a 
number of different configurations can exist.
2.1.3.1
Single-Channel Mode
In this mode, all memory cycles are directed to a single-channel. Single-channel mode 
is used when either Channel A or Channel B DIMM connectors are populated in any 
order, but not both.
2.1.3.2
Dual-Channel Mode – Intel
®
 Flex Memory Technology Mode
The IMC supports Intel Flex Memory Technology Mode. Memory is divided into a 
symmetric and a asymmetric zone. The symmetric zone starts at the lowest address in 
each channel and is contiguous until the asymmetric zone begins or until the top 
address of the channel with the smaller capacity is reached. In this mode, the system 
runs with one zone of dual-channel mode and one zone of single-channel mode, 
simultaneously, across the whole memory array.
Note:
Channels A and B can be mapped for physical channel 0 and 1 respectively or vice 
versa; however, channel A size must be greater or equal to channel B size.
Table 2-4.
System Memory Timing Support
Segment
Transfer 
Rate 
(MT/s)
tCL
(tCK)
tRCD
(tCK)
tRP
(tCK)
CWL
(tCK)
DPC
CMD 
Mode
Notes
1
Desktop
1333
9
9
9
7
1
1N/2N
2
2N
1600
11
11
11
8
1
1N/2N
2
2N
AIO
1333
9
9
9
7
1
1N/2N
2
2N
1600
11
11
11
8
1
1N/2N