Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Preparing
17
Installing
Various Projection Methods
Warning
•
A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If
it is not installed correctly, it could fall causing an accident and injury.
it is not installed correctly, it could fall causing an accident and injury.
•
If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening,
or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall
from its ceiling mount. This could cause serious injury to anyone under the projector and also damage the
projector.
or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall
from its ceiling mount. This could cause serious injury to anyone under the projector and also damage the
projector.
•
Do not setup the projector on its side. This may cause malfunctions to occur.
•
Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke
from fires or tobacco smoke.
from fires or tobacco smoke.
Attention
Clean the air filter once every three months. Clean it more often if the environment is particularly dusty.
s
Placing on a table and so on and projecting Suspending from the ceiling and projecting
c
When projecting from a ceiling, change Projection to a ceiling setting.
s
Settings -
Projection
Using lens shift
With lens shift, you can adjust the projection position up,
down, left, and right.
down, left, and right.
This allows you to make easy adjustments without distorting
the image, even if you cannot setup the projector directly in
front of the screen.
the image, even if you cannot setup the projector directly in
front of the screen.