Epson EH-TW8100 V11H524070LW User Manual

Basic Operations

25

If the Target Image is not Projected

If the image is not projected, you can change the source using one of the following methods.

Remote control

Control panel

Press the button for the target port.

Press the 

 button and select the target port.

Press the 

 button to confirm the selection.

EH-TW9100W/EH-

TW8100W

EH-TW9100/EH-TW8100

c

•

For video equipment, start playback first and then change the source.

•

If the color looks unnatural when changing to a Video or Component source, check that the port you
have connected to is the same as the Input Signal. 

s

 Extended - Input Signal - Video Signal/

Component 

Turning Off

a

Turn off the connected equipment.

b

Press the 

 button on the remote

control or the projector's control
panel.

Remote control

Control panel

A confirmation message is displayed.

c

Press the 

 button again.

Projection ends, and the lens shutter closes
automatically.

c

When Standby Confirmation is
set to Off, you can turn off the
projector by pressing the 
button on the remote control
once. 

s

 Extended - Display -

d

Wait until cool-down is complete.

The operation indicator on the projector's
control panel stops flashing.