Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Basic Operations
29
Adjusting the Position of the Projected Image (Lens Shift)
If the projector cannot be setup in front of the screen, you can adjust the position of the image by using lens
shift.
shift.
Make adjustments using the lens shift dial.
You can adjust the position up, down, left, and right
within the range of the dotted line shown in the illus-
tration on the right.
within the range of the dotted line shown in the illus-
tration on the right.
The vertical (V) position (up and down) can be adjusted
by up to 96% of the height of the screen, while the hor-
izontal (H) position (right and left) can be adjusted by
up to 47% of the width of the screen.
by up to 96% of the height of the screen, while the hor-
izontal (H) position (right and left) can be adjusted by
up to 47% of the width of the screen.
To reset the image position to the center, return the dial
to the central position.
to the central position.
To locate the center of the lens shift range, turn the lens
shift dial until you hear it click.
shift dial until you hear it click.
Caution
When transporting the projector, return the lens to the central position. If you transport the projector when
the lens is shifted up, down, left, or right, the lens shift mechanism could be damaged.
the lens is shifted up, down, left, or right, the lens shift mechanism could be damaged.
c
If keystone distortion occurs when projecting at an angle by using lens shift, you may not be able
to correct the distortion completely. When using lens shift, setup the projector so that it is parallel
to the screen, and then only use lens shift to adjust the position.
to correct the distortion completely. When using lens shift, setup the projector so that it is parallel
to the screen, and then only use lens shift to adjust the position.