Epson EH-TW8100 V11H524070LW User Manual

Adjusting the Image

42

Viewing the Image at the Saved Image Quality
(Memory Function)

Saving Function

You can save the adjustment values for some images and image quality settings in the configuration menu
for later use (Save Memory).

Because these saved adjustment values can be loaded from the remote control, you can easily switch to your
preferred image quality (Load Memory).

The following configuration menu functions can be saved.

Image

s

 

Color Mode, Power Consumption, Brightness, Contrast, Color Saturation, Tint, Sharpness,
Abs. Color Temp., Skin Tone, Advanced-Sharpness, Offset, Gain, Gamma, Hue, Saturation,
Brightness, Auto Iris

Signal

s

 

Progressive, Motion Detection, Frame Interpolation, Super-resolution

Advanced

Noise Reduction, Setup Level, EPSON Super White, Overscan, HDMI Video
Range

Saving a Memory

You can register a memory when Color Mode is set to anything except Auto.

a

Make settings that you want to save to
the configuration menu.

b

Press the 

 button.

EH-TW9100W/EH-

TW8100W

EH-TW9100/EH-

TW8100

c

Use the 

 buttons to

select Save Memory, and then press
the 

 button to confirm the

selection.

The Save Memory screen is displayed.

d

Use the 

 buttons to

select the memory name to be saved,
and then press the 

 button to

confirm the selection.

The current projector settings are saved to
the memory.

When the mark to the left of the memory
name turns green, saving is complete. If you
select a memory name that has already
been used, a message is displayed asking if
you want to overwrite the data. If you select
Yes, the previous content is erased and the
current settings are saved.