Epson EH-TW8100 V11H524070LW User Manual

Product codes
V11H524070LW
Page of 109
Useful Functions
45
Enjoying 3D Images
Setting 3D Images
When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW9100W/EH-TW8100W only) source,
the image is automatically projected in 3D.
The following 3D formats are supported.
Frame Packing
Side by Side
Top and Bottom
a
Connect a video device capable of
playing 3D images to the projector.
b
Turn on the video device and the
projector, and then press the 
button.
If the 3D image is projected automatically,
you do not need to press any buttons.
If the 3D image cannot be viewed
Check the following if the 3D effect is not displayed correctly, even after switching to 3D mode.
Check that the 3D format for the AV device and the 3D Format for the projector match. 
s
 Signal - 3D Setup - 3D
Format 
See the manual provided with the AV device for more information on making settings for the AV device.
The synchronization timing for the 3D Glasses may have been inversed. Inverse the synchronization using Inverse
3D Glasses
, and then try again. 
s
 Signal - 3D Setup - Inverse 3D Glasses 
If a 3D image is not displayed, try switching by pressing the 
 button.
c
How a 3D image is perceived varies depending on the individual.
The image is not displayed in 3D if 3D Display is set to Off. Press the 
 button on the remote
control. 
s
 Signal - 3D Setup - 3D Display 
The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed
correctly, use 3D Format to select another format. 
s
 Signal - 3D Setup - 3D Format 
If the 3D effect is not displayed correctly, try reversing using Inverse 3D Glasses
s
 Signal - 3D
Setup - Inverse 3D Glasses 
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off
s
 Signal - 3D Setup - 3D Viewing Notice 
You can also convert 2D images to 3D images. 
s
 
During 3D projection, the following configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Sharpness, Split Screen, Overscan (set to Off),
Super-resolution, Frame Interpolation (set to Off)
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.