Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Useful Functions
55
c
•
The receiver is located within the intake vent of the projector and therefore cannot receive any signals
directly from the rear. Set up so that the front of the projector is facing the WirelessHD Transmitter.
Also, make sure that the air intake vent on the left-hand side of the projector is not covered.
directly from the rear. Set up so that the front of the projector is facing the WirelessHD Transmitter.
Also, make sure that the air intake vent on the left-hand side of the projector is not covered.
•
Place the WirelessHD Transmitter on a level surface facing towards the projector.
•
You can view the signal strength from the WirelessHD settings menu.
s
Settings - WirelessHD -
Reception
Setting the WirelessHD Transmitter
a
Set up the WirelessHD Transmitter
connected to the projector so that
they are facing each other.
connected to the projector so that
they are facing each other.
s
b
Connect the WirelessHD Transmitter
to an electrical outlet using the
supplied AC adapter.
to an electrical outlet using the
supplied AC adapter.
c
Using an HDMI cable, connect the AV
device you want to use to the Input
port on the WirelessHD Transmitter.
device you want to use to the Input
port on the WirelessHD Transmitter.
You can connect up to five multi-media
players.
players.
c
You can connect another output device, such as a television, to the Output port on the WirelessHD
Transmitter. You can switch between output images using the remote control.
Transmitter. You can switch between output images using the remote control.
s