Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Configuration Menu
70
Signal menu
Function
Menu/Settings
Explanation
3D Setup
*1
3D Display
On, Off
Enables or disables the 3D Display function.
s
2D-to-3D Conver-
sion
sion
Off, Weak, Medium,
Strong
Strong
Sets the strength of the 3D effect when convert-
ing 2D to 3D images.
ing 2D to 3D images.
s
3D Format
Auto, Side by Side,
Top and Bottom, 2D
Top and Bottom, 2D
Sets the 3D format for the input signal. If set to
Auto, the format is recognized automatically.
Auto, the format is recognized automatically.
3D Depth
-10 - 10
Sets the depth for the 3D image.
Diagonal Screen
Size
Size
60 - 300
Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
matching this to the actual size, you can achieve
the optimum 3D effect.
3D Brightness
Low, Medium, High
Sets the brightness for the 3D image.
Inverse 3D Glasses
Yes, No
Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
3D Viewing Notice
On, Off
Turns the notice that appears when viewing 3D
content on or off.
content on or off.
Aspect
*2
Auto, Normal, Full, Zoom, Wide, Anamor-
phic Wide
phic Wide
*7
, Horiz. Squeeze
*7
Selects the aspect mode.
s
Zoom Size
*2
(Available when Aspect or Zoom are set.)
Any parts at the top or bottom that cannot be
seen when Zoom is set are squeezed vertically
to fit on the screen. The higher you set this value
the more the image is squeezed vertically.
Any parts at the top or bottom that cannot be
seen when Zoom is set are squeezed vertically
to fit on the screen. The higher you set this value
the more the image is squeezed vertically.
Zoom Caption
Pos.
Pos.
*2
(Available when Aspect or Zoom are set.)
If subtitles are not completely visible when view-
ing images with subtitles at the bottom, you can
adjust the position of the image up or down until
the subtitles become visible.
If subtitles are not completely visible when view-
ing images with subtitles at the bottom, you can
adjust the position of the image up or down until
the subtitles become visible.
Tracking
*2
*3
Varies depending on the input signal.
Adjusts computer images when vertical stripes
appear in the images.
appear in the images.
Sync.
*2
*3
0 - 31
Adjusts computer images when flickering, fuzzi-
ness, or interference appear in the images.
ness, or interference appear in the images.
•
Adjusting the Brightness, Contrast, or Sharp-
ness may cause flickering or blurriness.
ness may cause flickering or blurriness.
•
Adjusting the synchronization after adjusting
tracking allows for more accurate adjustments.
tracking allows for more accurate adjustments.
Position
*2
*4
Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
right when a part of the image is missing so that
the whole image is projected.