Epson EH-TW8100 V11H524070LW User Manual

Product codes
V11H524070LW
Page of 109
Configuration Menu
75
Function
Menu/Settings
Explanation
Reset
Yes, No
Resets all Settings to their default
settings.
*
Only EH-TW9100W/EH-TW8100W is displayed.
Extended menu
Function
Menu/Settings
Explanation
Operation
Direct Power On
On, Off
You can set up the projector so that projection
starts as soon as it is turned on without any but-
ton operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the main power switch is
turned on.
Sleep Mode
Off, 5min., 10min.,
30min.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When set to Off,the projector
never enters sleep mode. When in standby
mode, press the 
 button on the remote con-
trol or the 
 button on the control panel to
start projection.
Illumination
On, Off
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
Trigger Out
On, Off
*1
Set the Trigger Out function to communicate the
projector's power on status and so on to external
devices.
When set to Off, no voltage is output from the
Trigger out port.
When set to On or Power, voltage is output from
the Trigger out port when the projector is on.
For Anamorphic Wide, when the projector is on
and Aspect is set to Anamorphic Wide or Horiz.
Squeeze
, voltage is output from the Trigger
out port.
If you change this setting, the new setting will
take effect the next time you turn the projector
on.
Off, Power, Ana-
morphic Wide
*2
High Altitude Mode On, Off
Set this to On if you are using the projector above
an altitude of 1500 meters.