Bosch ISW-BRL1-WX F.01U.013.688 User Manual
Product codes
F.01U.013.688
Intrusion Alarm Systems | wLSN Relay Module
wLSN Relay Module
www.boschsecurity.com
u
Wiring terminals for one Form C relay rated 2 A at
30 VDC (resistive load)
30 VDC (resistive load)
u
Wiring terminals for supervised sensor loop input
with adjustable supervision interval
with adjustable supervision interval
u
Wiring terminals for connection of optional alternate
power source (6 VDC to 14 VDC)
power source (6 VDC to 14 VDC)
u
Externally-visible LED indicates RF signal strength
u
Determine suitability of chosen installation location
with RF Signal Strength (RFSS) mode
with RF Signal Strength (RFSS) mode
The wLSN Relay Module allows the control panel to
switch outputs wirelessly by turning on or off a Form C
relay. The wireless Local SecurityNetwork (wLSN) pro-
tocol allows multiple output devices, including the
wLSN Relay Module, to be synchronized so that they
all operate together using the same cadence.
The wLSN Relay Module also accepts a supervised
sensor loop input from an external device.
switch outputs wirelessly by turning on or off a Form C
relay. The wireless Local SecurityNetwork (wLSN) pro-
tocol allows multiple output devices, including the
wLSN Relay Module, to be synchronized so that they
all operate together using the same cadence.
The wLSN Relay Module also accepts a supervised
sensor loop input from an external device.
Functions
Alternate Power Supply
An optional alternate external 6 VDC to 14 VDC power
supply can be connected to the relay. The alternate
power supply is used as a supplemental supply to
power the relay.
supply can be connected to the relay. The alternate
power supply is used as a supplemental supply to
power the relay.
Notice
Do not operate the wLSN Relay Module without
batteries.
Do not operate the wLSN Relay Module without
batteries.
RF Signal Strength Mode
Removing the device cover and pressing the tamper
switch four times within 10 seconds of battery installa-
tion activates the RF signal strength mode. The LED
lights steady for 5 sec and then begins to flash. A slow
flash (approximately 1 sec on, 1 sec off) indicates in-
sufficient signal reception. A quickly flashing LED (ap-
switch four times within 10 seconds of battery installa-
tion activates the RF signal strength mode. The LED
lights steady for 5 sec and then begins to flash. A slow
flash (approximately 1 sec on, 1 sec off) indicates in-
sufficient signal reception. A quickly flashing LED (ap-
proximately five times as fast as the slow flash) indi-
cates the device is receiving sufficient signal from the
wLSN Hub.
cates the device is receiving sufficient signal from the
wLSN Hub.
Certifications and Approvals
Complies with EN50131-1 Grade 2, Environmental Class II
Region
Certification
Europe
CE
1999/5/EC, IEC60950-1: 2001,
EN60950-1:2001 +A11:2004,
EN50130-4: 1996 +A1: 1998 +A2:
2003, EN61000-4-2: 1995 +A1: 1998
+A2: 2001, EN61000-4-3: 2002 +A1:
2003 +A2: 2005, EN61000-4-4: 1995
+A1: 2001 +A2: 2001, EN61000-4-5:
1995 +A1: 2001, EN61000-4-6: 1996
+A1: 2001 +A2: 2001 +A3: 2005,
EN61000-4-11: 1994 +A1: 2001,
EN55022/ANSI C63.4: 2003, ETSI EN
300 220-1 V1.3.1: 2000-09, ETSI EN
301 489-1 V1.4.1: 2002-08, ETSI EN
301 489-3 V1.4.1: 2002-08
Belgium
INCERT
B-509-0054b
Installation/Configuration Notes
Compatibility Information
The wireless Local SecurityNetwork (wLSN) including
the wLSN Relay Module is compatible with the Easy
Series Control Panel.
the wLSN Relay Module is compatible with the Easy
Series Control Panel.