Philips Blu-ray Disc player BDP5010 BDP5010/F7 User Manual

Compresses the range between soft 
and loud sounds.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.

Sets the sampling rate for outputting 
the PCM audio from the digital output 
(coaxial/optical).
“On”:
Over 96 kHz PCM audio will be down 
sampled at 48 kHz.
“Off”:
For BD or DVD recorded in LPCM 
without copyright protection,                  
2-channel audio signals up to 96 kHz 
are output as LPCM signals.

Select “On” to enjoy the stereophonic 
virtual space through your existing 2 
channel stereo system during 
playback of BD-video or DVD-video.

“Mix Audio Output”:
The audio for the secondary video and 
the interactive application will be 
output together with the audio for the 
primary video.
“Primary Audio Only”:
Only the audio for the primary video 
will be output.
When playing back a BD-video which 
only contains the primary audio, the 
audio output will be the same case as 
the “Primary Audio Only” even if the 
“Blu-ray Disc Audio” is set to “Mix 
Audio Output”.

HDMI Audio
• This  feature  is 

available only when 
the display device is 
connected by an 
HDMI cable.

• Refer to page 39 for 

more information.

Sets the audio format for the sound 
output from the HDMI OUT.

Digital Out
• When HDMI cable is 

connected, make 
sure “HDMI Audio” 
setting is set to “Off” 
to change the 
“Digital Out” 
setting.

• Refer to page 40 for 

more information.

Sets the audio format for the sound 
output from the DIGITAL OUT 
(OPTICAL/COAXIAL).