Philips Blu-ray Disc player BDP5010 BDP5010/F7 User Manual

* The unit can also be turned on by pressing these buttons.

• Press to turn on the unit, or to turn the unit into the 

standby mode. (To completely shut down the unit, 
you must unplug the AC power cord).

• Place a disc when opening the disc tray.

• Press to open or close the disc tray.

• Receive signals from your remote control so that you 

can control the unit from a distance.

• Refer to “Front Panel Display” on page 10.

• Press to stop playback.

• Press to pause playback.

• Press to start or resume playback.

• Insert an SD Memory Card and play back the 

contents in it.

• Connect to a standard AC outlet to supply power to 

this unit.

• Unplug this cord from the AC outlet to completely 

shut down the unit.

• Use to connect a TV monitor with component video 

inputs with a component video cable.

• Use to connect a TV monitor, an AV receiver / 

amplifier or other device with an RCA video cable.

• Use to connect to an AV receiver / amplifier with 

5.1ch audio cable.

• Use to connect a telecommunications equipment 

with LAN cable.

• Use to connect to a display with an HDMI compatible 

port with an HDMI cable.

• Use to connect a TV monitor, an AV receiver / 

amplifier or other device with an RCA audio cable.

• Use to connect an AV receiver / amplifier, Dolby 

Digital/DTS decoder or other device with a digital 
audio optical/coaxial input jack with a digital audio 
optical/coaxial cable.

• Do not touch the inner pins of the jacks on the rear 

panel. Electrostatic discharge may cause permanent 
damage to the unit.

• This unit does not have the RF modulator.