Philips 5.1 Home theater HTS3051BV HTS3051BV/F7 User Manual

EN

* The unit can also be turned on by pressing these buttons.

Q (standby/on) button

• Press to turn on the unit, or to turn the unit into the 

standby mode. (To completely turn off the unit, you 
must unplug the AC power cord.)

• Press and hold for 10 seconds to shut down the unit.
• This button lights up in red when the unit is in 

standby mode and turns off when the power is on.

• Place a disc after opening the disc tray.

A

• Press to open or close the disc tray.

H

 / G (previous / next) button

• Press to skip to the previous or next title / chapter / 

track.

C

• Press to stop playback.

B

• Press to start or resume playback.

• Press to switch the active source mode.

• Receive signals from your remote control so that 

you can control the unit from a distance.

• Refer to “Front Panel Display” on page 14.

• Rotate to adjust the volume.

• Insert an SD Memory Card and play back the 

contents in it.

• Use to connect your portable audio player with 

3.5mm stereo audio cable.

• Connect to a standard AC outlet to supply power to 

this unit.

• Unplug this cord from the AC outlet to completely 

turn off the unit.

))

• Use to connect supplied 5.1ch speakers.

• Use to connect a telecommunications equipment 

with LAN cable.

• Use to connect to a display with an HDMI 

compatible port with an HDMI cable.

• Use to connect an other device with audio out jack 

with an RCA audio cable.

 jack

• Use to connect the supplied FM wire antenna.

• Use to connect an other device with a digital audio 

coaxial output jack with a digital audio coaxial 
cable.

• Use to connect a TV monitor with component video 

inputs with an RCA component video cable.

• Use to connect a TV monitor, an AV receiver / 

amplifier or other device with an RCA video cable.

• This unit will be turned into the standby mode 

automatically after 25 minutes of no action.

• Do not touch the inner pins of the jacks on the rear 

panel. Electrostatic discharge may cause permanent 
damage to the unit.

• This unit does not have the RF modulator.

E1S07UD_E1S08UD_EN.book  Page 11  Monday, January 31, 2011  2:42 PM