Bosch VEZ-211-IWCS User Manual
Cameras, Fixed | Extreme Series | 239
CSA/NRTL LR 113310
Class
Class
2258 / 82 – Process Control Equipment – For Hazardous
Locations – Certified to US Standard
2258 / 02 – Process Control Equipment – For Hazardous
Locations
Safety
UL / CSA / ATEX
UL 508, 16th Edition – Industrial Control Equipment
UL 698, 11th Edition – Industrial Control Equipment for
UL 698, 11th Edition – Industrial Control Equipment for
Use in Hazardous (Classified) Locations
UL 1203, 2nd Edition – Explosion-Proof and Dust-Ignition-
UL 1203, 2nd Edition – Explosion-Proof and Dust-Ignition-
Proof Elec. Eqmt for Use in Hazardous (Classified) Loca-
tions
CSA C22.2 No.0-M1991 – General Requirements – Cana-
CSA C22.2 No.0-M1991 – General Requirements – Cana-
dian Electrical Code Part II
CSA C22.2 No.0.4-M1982 – Bonding and Grounding of
CSA C22.2 No.0.4-M1982 – Bonding and Grounding of
Electrical Equipment (Protective Grounding)
CSA C22.2 No.25-M1966 – Enclosures for Use in Class II
CSA C22.2 No.25-M1966 – Enclosures for Use in Class II
Groups E, F and G Hazardous Locations
CSA C22.2 No.30-M1986 – Explosion-proof Enclosures
CSA C22.2 No.30-M1986 – Explosion-proof Enclosures
for Use in Class I Hazardous Locations
CSA C22.2 No.94-M1991 – Special Purpose Enclosures
CSA C22.2 No.142-M1987 – Process Control Equipment
Class I, Division 1 and 2, Groups B, C, and D
Class II, Division 1 and 2, Groups E, F, G
Class III
ATEX Ex II 2G certified – Equipment or Protective System
CSA C22.2 No.94-M1991 – Special Purpose Enclosures
CSA C22.2 No.142-M1987 – Process Control Equipment
Class I, Division 1 and 2, Groups B, C, and D
Class II, Division 1 and 2, Groups E, F, G
Class III
ATEX Ex II 2G certified – Equipment or Protective System
intended for use in Potentially Explosive Atmospheres; Di-
rective 94/9/EC
ATEX Ex d IIC T6 certified – Equipment or Protective Sys-
ATEX Ex d IIC T6 certified – Equipment or Protective Sys-
tem intended for use in Potentially Explosive Atmos-
pheres; Directive 94/9/EC
Operational Temperature Code T6 (At ambient operational temperature
of 40ºC, the maximum unit surface temperature will not ex-
ceed 85ºC.)
Environ-
mental
CSA / NEMA TYPE 4X
Installation/Configuration Notes
Dimensions
Dimensions
Flexible Mounting Options
•
Wall mounting
-
use a combination of EXMB.070B (EX70 adapter
plate), EXMB.028B (pan/tilt bracket) and EXMB.
017B (wall mount adapter).
•
Pole mounting
-
use a combination of EXMB.070B (EX70 adapter
plate), EXMB.028B (pan/tilt bracket) and EXMB.
015B (pole mount adapter).
•
Ceiling mounting
-
use a combination of EXMB.070B (EX70 adapter
plate) and EXMB.002B (ceiling bracket).
All brackets are available as optional accessories.
Technical Specifications
Color Cameras
CCD
MX4 CCD Mechanical
Filter
C7 High Resolution Col-
or
Image Sensor
1/3 in CCD
1/3 in Interline Super-
HAD
Resolution
540 TVL color/ 540 TVL
mono
500 TVL
Effective Pixels
(NTSC)
768 (H) x 494 (V)
768 (H) x 494 (V)
Effective Pixels
(PAL)
752 (H) x 582 (V)
768 (H) x 582 (V)
Sensitivity
0.02 lx at F1.4
2.7 lx at F1.4
S/N Ratio
Greater than 48 dB
Greater than 48 dB
Output Signal
1 Vpp, 75 ohm
BLC
On / Off selectable
Gain Control
AGC automatic
Electronics Iris
1/60 to 1/100,000
(NTSC)
1/50 to 1/100,000
(PAL)
Voltage
12 - 24 VAC (50/60 Hz)
12 - 24 VDC
Power consumption 3.9 W max.
Operation Tempera-
Operation Tempera-
ture Range
-50 ºC to +40 ºC (-58 ºF to 104 ºF)
Weight
1.4 kg (3.1 lbs)
Dimensions
117 x 117 x 99 mm (4.6 x 4.6 x 3.9 in)
Construction
Powder-coated copper-free cast aluminum with
two 3/4-inch NPT conduit entries
Note
To order a CSA/ UL certified product use
product codes without the AT suffix. To order
an ATEX certified product use product codes
with the AT suffix.
product codes without the AT suffix. To order
an ATEX certified product use product codes
with the AT suffix.
www.boschsecurity.com
Bosch Security Systems B.V.
2