Bosch VEZ-211-IWCS User Manual

Camera Enclosures and Mounts | Indoor | 349

Features
▶ For 1/4-inch, 1/3-inch and 1/2-inch CCD Cameras
▶ Feed-through Wiring Option
▶ Aluminum and Advanced Polymer Construction
▶ Easy Installation
▶ Full Camera Accessibility
▶ Cost Competitive
▶ Multiple Accessories Available

The LTC 9480/00 Housing is smartly styled for indoor use.
This housing meets customers' demands for attractive
housings that are both cost competitive and easy to
install. They fit a wide range of 1/4-inch, 1/3-inch and 1/2-
inch format CCD cameras and lenses.

Functions
The design of these housings is unique. Removal of two
captive screws is all that is necessary to slide off the
cover and totally expose the camera and lens. This allows
access to all camera and lens controls when the camera is
in its mounted position. Power and video cabling can be
routed through liquid tight fittings in the bottom rear of
the housing or can be routed through the mounting base.
Feed-through mounts and J-mounts are available for these
housings. The base of the housing permits mounting to
pan/tilts, adjustable heads, and various wall mounts.

Quantity Component
1

LTC 9480/00 Indoor Housing

Maximum Camera Power

Use with 24 VAC cameras

not exceeding 30 W

Maximum Camera and Lens

(W x H x L)

68 x 54 x 197 mm (2.68 x 2.1 x 7.75 in.)

Cable Entry:
Two liquid tight rear fittings accept cable diameters from 4.3 mm to

11.9 mm (0.17 in to 0.47 in.).Two bottom feed- through liquid tight fit-

tings accept cable diameters from 4.6 mm to 7.9 mm (0.18 in to

0.31 in.).
Window

3 mm (0.12 in.) thick UV-stabilized polycarbon-

ate.

Housing Mounting

Four (4) available 1/4-20 tapped holes. Only

one set of two are required for mounting.

Camera Mounting

Removable camera bracket. Mounted with two

screws.

Construction

Aluminum cover, aluminum base, aluminum

mounting foot, polycarbonate faceplate, glass

reinforced polycarbonate end caps, neoprene

gasket, ethylene propylene seal, and all stain-

less steel hardware.

Finish

Dark mushroom.

Dimensions

See LTC 9480/00 drawing.

Weight

1.4 kg (3 lb)