Bosch VEZ-211-IWCS User Manual

364 | Camera Enclosures and Mounts | Indoor

Features
▶ For 1/4-inch, 1/3-inch & 1/2-inch CCD Cameras
▶ Feed-through Wiring Option
▶ Aluminum and Advanced Polymer Construction
▶ Easy Installation
▶ Full Camera Accessibility
▶ Available in Multiple Sizes

The LTC 9488 Series Housings are smartly styled housings
for indoor use. These housings meet customers' demands
for attractive housings that are both cost competitive and
easy to install. They are available in multiple sizes to fit a
wide range of cameras and lenses.

Functions
The design of these housings is unique. Removal of two
captive screws is all that is necessary to slide off the
cover and totally expose the camera and lens. This allows
access to all camera and lens controls when the camera is
in its mounted position. Power, video, and lens control
cabling can be routed through liquid tight fittings in the
bottom rear of the housing or can be routed through the
mounting base. Feed-through mounts and J-mounts are
available for these housings to completely hide the
cabling.
The base of the housings permits mounting to pan/tilts,
adjustable heads, and various wall mounts.

Quantity Component
1

LTC 9488/00 Indoor Housing

Indoor Units
LTC 9488/00

-

-

24 VAC

115 VAC

230 VAC

Maximum Camera and Lens:
LTC 9488/00

(WxHxL)

71 x 71 x 356 mm (2.8 x 2.8 x 14.0 in)

Cable Entry
9488/00
Three (3) liquid tight rear fittings, two (2) of which accept cable diame-

ters from 4.3 mm to 11.9 mm (0.17 in to 0.47 in) and one (1) that ac-

cepts cable diameters from 4.6 mm to 7.9 mm (0.18 in to 0.31 in).Two

(2) bottom feed-through liquid tight fittings accept cable diameters from

4.6 mm to 7.9 mm (0.18 in to 0.31 in).
Window

3 mm (0.12 in) thick UV-stabilized polycarbonate.

Housing Mounting Four (4) available 1/4-20 tapped holes. Only one set

of two is required for mounting.

Camera Mounting Removable camera bracket. Mounted with two

screws.

Construction

Aluminum cover, aluminum base, aluminum mount-

ing foot, polycarbonate faceplate, glass reinforced

polycarbonate end caps, neoprene gasket, ethylene

propylene seal, and all stainless steel hardware.

Finish

Dark mushroom

Dimensions

See drawings

Weight (approx.)

3.2 kg (7 lb)