Bosch VEZ-211-IWCS User Manual
Switching and Control | Switching and Control Systems | 419
LTC 8x00/90 Integrated
Series Allegiant Matrix/
Control Systems
Features
▶ Models from 8 cameras by 2 monitors to 32 cameras
▶ Models from 8 cameras by 2 monitors to 32 cameras
by 6 monitors
▶ Compact single bay construction
▶ Integral alarm interface and signal distribution
▶ Powerful alarm handling features
▶ SalvoSwitching
▶ Integral alarm interface and signal distribution
▶ Powerful alarm handling features
▶ SalvoSwitching
®
and SatelliteSwitch
®
capability
▶ PC-based software package available
The LTC 8100 Series, LTC 8200 Series, and LTC 8300
Series Allegiant
Series Allegiant
®
video switcher/control systems combine
both switching and computer technology to provide
powerful performance and unique system features for the
security user. Offering full matrix switching capability,
these systems can be programmed to display the video
from any camera on any monitor, either manually or via
independent automatic switching sequences.
These systems provide from 8 camera inputs, 2 monitor
outputs to 32 camera inputs, 6 monitor outputs, 2 to 4
keyboards, 8 to 32 direct connect alarm input points, an
integral signal distribution unit, and a computer interface
port. A logging printer port is available in the LTC 8300
Series systems.
These systems can be programmed with up to 60
sequences which can be run independently of each other
in either a forward or reverse direction.
powerful performance and unique system features for the
security user. Offering full matrix switching capability,
these systems can be programmed to display the video
from any camera on any monitor, either manually or via
independent automatic switching sequences.
These systems provide from 8 camera inputs, 2 monitor
outputs to 32 camera inputs, 6 monitor outputs, 2 to 4
keyboards, 8 to 32 direct connect alarm input points, an
integral signal distribution unit, and a computer interface
port. A logging printer port is available in the LTC 8300
Series systems.
These systems can be programmed with up to 60
sequences which can be run independently of each other
in either a forward or reverse direction.
Any of the sequences can utilize the SalvoSwitching
capability where any number of system monitors may be
selected to switch as a group. Using the optional
LTC 8059/00 Master Control Software package or the
LTC 8850/00 Graphical User Interface software package,
sequences can be made to activate and deactivate
automatically based upon the time of day and the day of
week.
Utilizing the unit’s integral signal distribution ports,
connections to on-site receiver/drivers are easily made.
On-site receiver/drivers provide operator control of pan,
tilt, zoom; multiple pre-positions; four auxiliaries; auto-
pan, and random scan. These systems also support
variable speed operation and full programming functions
of AutoDome
capability where any number of system monitors may be
selected to switch as a group. Using the optional
LTC 8059/00 Master Control Software package or the
LTC 8850/00 Graphical User Interface software package,
sequences can be made to activate and deactivate
automatically based upon the time of day and the day of
week.
Utilizing the unit’s integral signal distribution ports,
connections to on-site receiver/drivers are easily made.
On-site receiver/drivers provide operator control of pan,
tilt, zoom; multiple pre-positions; four auxiliaries; auto-
pan, and random scan. These systems also support
variable speed operation and full programming functions
of AutoDome
®
Series dome cameras.
When combined with an LTC 8016 Allegiant Bilinx™ Data
Interface unit, these switcher/controllers support
operations using Bilinx communication. With Bilinx, PTZ
control is accomplished using a bidirectional
communication protocol embedded in the video signal of
Bosch Dinion™ and AutoDome
Interface unit, these switcher/controllers support
operations using Bilinx communication. With Bilinx, PTZ
control is accomplished using a bidirectional
communication protocol embedded in the video signal of
Bosch Dinion™ and AutoDome
®
CCTV cameras. In
addition, Bilinx uses the standard video cable to transmit
alarm and status messages from the cameras, providing
superior performance without the need for separate data
transmission cables.
With their built-in alarm interface capability, an external
contact closure or logic level can be used to automatically
activate any camera to be displayed. Any monitor or group
of monitors can be set to display cameras under alarm
conditions. The base system contains three built in alarm
response modes: basic, auto-build, and sequence &
display. In addition to these three modes, the PC-based
software packages offer the ability to combine any or all
of the three standard modes within the same system.
Alarm video may be selected to reset either manually or
automatically. In addition, a 16‑character alarm title can
be selected to appear instead of the camera title during
alarm conditions.
System operation and programming is accomplished using
a full-function, ergonomically designed keyboard (sold
separately). Built-in operator priority levels and the ability
to restrict certain operators from controlling designated
functions provide maximum flexibility.
These systems include a black outlined 48-character on-
screen display for time-date, camera number, camera ID
(16-characters), an icon to identify controllable cameras,
and monitor (12-characters) or status information. Over
235 characters are available when programming camera
ID and monitor titles.
Utilizing a Windows®-based PC and the optional
LTC 8059/00 Master Control Software package or
LTC 8850/00 GUI software, enhanced programming and
switching features can be obtained. A user-friendly
spreadsheet format provides the ability to enter camera
and monitor titles, program of operator names and
priorities, 64 timed event actions, change system
alarm and status messages from the cameras, providing
superior performance without the need for separate data
transmission cables.
With their built-in alarm interface capability, an external
contact closure or logic level can be used to automatically
activate any camera to be displayed. Any monitor or group
of monitors can be set to display cameras under alarm
conditions. The base system contains three built in alarm
response modes: basic, auto-build, and sequence &
display. In addition to these three modes, the PC-based
software packages offer the ability to combine any or all
of the three standard modes within the same system.
Alarm video may be selected to reset either manually or
automatically. In addition, a 16‑character alarm title can
be selected to appear instead of the camera title during
alarm conditions.
System operation and programming is accomplished using
a full-function, ergonomically designed keyboard (sold
separately). Built-in operator priority levels and the ability
to restrict certain operators from controlling designated
functions provide maximum flexibility.
These systems include a black outlined 48-character on-
screen display for time-date, camera number, camera ID
(16-characters), an icon to identify controllable cameras,
and monitor (12-characters) or status information. Over
235 characters are available when programming camera
ID and monitor titles.
Utilizing a Windows®-based PC and the optional
LTC 8059/00 Master Control Software package or
LTC 8850/00 GUI software, enhanced programming and
switching features can be obtained. A user-friendly
spreadsheet format provides the ability to enter camera
and monitor titles, program of operator names and
priorities, 64 timed event actions, change system
www.boschsecurity.com
Bosch Security Systems B.V.
8