Manualsbrain.com
  1. Manuals
  2. Brands
  3. Transition Networks
  4. E-100BTX-FX-05101-NA
  5. Leaflet

Transition Networks E-100BTX-FX-05101-NA Leaflet

Download
Page of 1
Stand-Alone
single fiber model
Specifications
Standards 
 
IEEE Std. 802.3 100BASE-FX, 100BASE-TX
Switches  
SW1: Auto-Negotiation On/Off 
  
SW2: Pause TX On/Off 
  
SW3: Link Pass Through On/Off 
  
SW4: Far-End-Fault On/Off
Jumpers  
Jumper Block 1: AutoCross™ enable
Status LEDs   
PWR (Power) 
 
 
SDF or LKF (Link Fiber) 
 
 
SDC or LKC (Link Copper) 
 
 
RXF (Receive Fiber) 
 
 
RXC (Receive Copper)
Dimensions  
Width: 3.0” [76 mm] 
  
Depth: 4.7” [119 mm] 
  
Height: 1.0” [25 mm]
Power 
 
External AC/DC required: 12 VDC,  
 
 
0.5 A, unregulated, standard
Environment   
0 – 50°C, 5% – 95% humidity non-condensing,  
 
 
0 – 10,000 ft. altitude
Shipping Weight 
2 lbs. [0.90 kg]
Safety Compliance 
Wall Mount Power Supply: 
 
 
UL Listed and CSA certified
Regulatory Compliance 
FCC Class A, EN55024, EN55022 Class A,  
 
 
EN61000, CE Mark
Warranty  
Lifetime
4
Extend Network Distance 
 
    Used in pairs, this media converter can extend   
    distances between two twisted pair switches or  
    a switch and a server up to 2 km over multimode  
    fiber or up to 120 km over single mode fiber.
4
Connect Remote Devices 
 
    Using one media converter, a switch with a  
    copper port can be connected to a switch with  
    an existing fiber interface.
E-100BTX-FX-05(xxxx)
E-100BTX-FX-05(xxxx)
stand-alone media converter
100BASE-TX to 100BASE-FX  
 
see also: 
Fast Ethernet 100BASE-TX to 100BASE-FX Point System™ Slide-In-Module Media Converters 
Fast Ethernet Media Converter
Features
4
Operates under heavy traffic loads without  
    excess heat, so there is no need for a  
    failure-prone internal fan 
4
Round trip delay of only 40 bit times  
    - far below the Class II rating of 92 bit times 
4
Auto-Negotiation 
 
4
AutoCross™ [
 
4
Link Pass Through 
 
4
Far-End-Fault (FEF) 
 
4
Pause 
­
4
Automatic Link Restoration 
The converters will automatically re-establish link when connected to two 
10/100 auto-negotiating switches, after the fault condition has been cor-
rected. With other manufacturers’ converters the user must intervene to 
re-establish link.
Extend Network Distance
Fast Ethernet
Ordering Information
E-100BTX-FX-05
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm MM (ST) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(SC)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm multimode (SC) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(LC)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm multimode (LC) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(MT)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm MM (MT-RJ) 
[2 km/1.2 mi.] Link Budget: 14.5 dB
E-100BTX-FX-05(SM)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
E-100BTX-FX-05(SMLC)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
E-100BTX-FX-05(LH)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(XL)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
E-100BTX-FX-05(LW)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
E-100BTX-FX-05(XLW)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm SM (SC) 
[120 km/74.6 mi.] Link Budget: 36.0 dB
Single Fiber Products
 
 
Recommended use in pairs 
E-100BTX-FX-05(100)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX  
 
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
E-100BTX-FX-05(101)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX 
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
E-100BTX-FX-05(102)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
E-100BTX-FX-05(103)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB 
E-100BTX-FX-05(104)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm TX/1550nm RX   
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(105)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm TX/1310nm RX   
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(106)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm TX/1550nm RX   
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 33.0 dB
E-100BTX-FX-05(107)
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm TX/1310nm RX   
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 32.0 dB
 
Optional Accessories (sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-CC 
     Piggy Back Power Supply
SPS-2460-SA 
     Stand-Alone Power Supply
Mounting Options
E-MCR-05 
     12-Slot Media Converter Rack
RMS19-SA4-01 
     4-Slot Media Converter Shelf
WMBD 
     DIN Rail Bracket 5.0” [127 mm]
WMBD-FS 
     DIN Rail Bracket (flat, small) 3.1” [79 mm]
WMBL 
     Wall Mount Bracket 4.0” [102 mm]
WMBV 
     Vertical Wall Mount Bracket 5.0” [127 mm]
100BASE-TX to 100BASE-FX