Kingston Technology 2GB 667MHz DDR2 Non-ECC CL5 SODIMM KVR667D2S5/2G Data Sheet
Product codes
KVR667D2S5/2G
Memory Module Specifications
KVR667D2S5/2G
2GB 256M x 64-Bit DDR2-667
CL5 200-Pin SODIMM
CL5 200-Pin SODIMM
Kingston.com
Document No. VALUERAM0524-001.A00 11/31/06
DESCRIPTION
This document describes ValueRAM’s 256M x 64-bit 2GB
(2048MB) CL5 DDR2-667 SDRAM (Synchronous DRAM)
memory module. The components on this module include
sixteen stacked 128M x 8-bit DDR2-667 SDRAM. This 200-
pin SODIMM uses gold contact fingers and requires +1.8V.
The electrical and mechanical specifications are as follows:
(2048MB) CL5 DDR2-667 SDRAM (Synchronous DRAM)
memory module. The components on this module include
sixteen stacked 128M x 8-bit DDR2-667 SDRAM. This 200-
pin SODIMM uses gold contact fingers and requires +1.8V.
The electrical and mechanical specifications are as follows:
SPECIFICATIONS
Clock Cycle Time (tCK) CL=5
3ns (min.) / 8ns (max.)
Row Cycle Time (tRC)
54ns (min.)
Refresh to Active/Refresh
127.5ns
Command Time (tRFC)
Row Active Time (tRAS)
39ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.944 W (operating)
UL Rating
94 V - 0
Figure 1: KVR667D2S5/2G 200-Pin SODIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM
combination and/or the module height may vary from what is described here.