Star Micronics SM-T301I-DB50 39631910 User Manual

- 11 -

Change the Memory switch by following operations. (Refer to page 13 “Memory Switch Set-
ting Table”).

1.  Press and hold POWER for approx. 3 seconds, and printer is turned on.

2.  To put the printer into Memory Switch Setting mode, press and hold both the POWER &

FEED buttons for 3 seconds. After the ERROR LED flashes five (5) times, you can configure 
the settings. Release the buttons after you surely confirm the LED flashes five (5) times, to 
get a printer into the setting mode.

3.  To swith the printer mode , press FEED button.
4.  If the current printer mode does not need to be changed, press FEED button again and 

swith the printer mode. To change the setting, press POWER button.