Star Micronics SM-T301I-DB50 39631910 User Manual

- 20 -

Printing method

Direct line thermal printing

Characters per line

Maximum 64 cpl

Character size

Alphanumeric characters: 9 X 24 dots, 12 X 24 dots, and 8 X 16 dots
Japanese characters: 24 X 24 dots

Character types

Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set, JIS 
Level-2 Kanji Set, and special characters

Dot density

203 dpi (8 dots/mm)

Printing width

72mm, 576 dots

Print speed

75 mm/s (max)

Bluetooth Spec.

Bluetooth V2.1+EDR / Class 2 (10 m)

Frequency Range

2.4 GHz ISM BAND

Data Transmission Rate

57600 bps Fixed

Interface

Bluetooth

Data bit

8 Data bit Fixed

Parity bit

No Parity Fixed.

Stop bit

1 Stop bit Fixed.

SSP

Incompatible

RS-232C & Bluetooth Ver 2.1+EDR

Roll paper

Thermal roll paper (80 mm wide with a diameter of Ф50 mm)

Barcode

1D: JAN, EAN, UPC, ITF, Code39, Code93, Code128, CODABAR(NW-7)
2D: PDF417, QR Code, DATA Matrix

Receive buffer size

1M bytes *1)

MSR

SM-T300i :  Not Supported MSR
SM-T301i : ISO 7810 / 7811 / 7812 1st and 2nd Track Reading

LCD

128×32 Dots FSTN (Blue LED Backlight)

Battery pack

Rechargeable 7.4V DC

Battery operating time

Approximately 11 hour printing (12 receipts per hour)
Approximately 13 hour prnting

(12 receipts per hour / auto power down mode)

Battery charger

Input:  100 to 250 V AC, 50 to 60 Hz
Output:8.4 VDC/0.8 A, Time required for full charge: 4 h

Environmental 
Requirements

Temperature *2 )

-10 

o

C to 50 

o

C (for operation)

-20 

o

C to 60 

o

C (for storage)

Humidity

30% to 80% (for operation)
10% to 90% (for storage)

Print head life

Approximately 50 km

Drop resistance

1.5 m / 1.2 m (Model with Card Reader)
*Our test procedure, Not guarantee.

Dust protected,
Splash proof

IP54 Certified

*1)  If the quantity of data which is printed at once is more than 1M byte on Bluetooth communication, it would 

cause the buffer to overflow and the data to get damaged.

*2)  Under 0°C, please change Density mode and Quality mode of the memory switch settings to both “High”.
 

If you want to print a delicate pattern like Barcode printing, please use the printer over 0°C.