Moxa VPORT 36-1MP-T User Manual
2
w w w. m o x a . c o m
i n f o @ m o x a . c o m
IP Surveillance
Video Viewing:
• DynaStream™ supported for automatic adjustment of frame rate
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections
PTZ: Digital PTZ with 4X zoom
• DynaStream™ supported for automatic adjustment of frame rate
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections
PTZ: Digital PTZ with 4X zoom
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS,
Modbus/TCP, 802.1X, SSH/SSL
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS,
Modbus/TCP, 802.1X, SSH/SSL
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector
Serial Interface
RS-485: 1 half-duplex RS-485
GPIO
Digital Inputs: 1, max. 8 mA
Low: +13 to +30 V; High: -30 to +3 V
Relay Output: 1, max. 24 VDC @ 1 A
Low: +13 to +30 V; High: -30 to +3 V
Relay Output: 1, max. 24 VDC @ 1 A
LED Indicators
STAT: Indicates if the system is booted properly or not
Network: 10 Mbps or 100 Mbps
Power: Power on/off
Network: 10 Mbps or 100 Mbps
Power: Power on/off
Local Storage
SD Socket: Standard SD socket (SDHC)
Power Requirements
Input:
• Power consumption: 7.5 W
• Redundant power inputs
• 12/24 VDC, 24 VAC, or Power-over-Ethernet (IEEE 802.3af)
• Power consumption: 7.5 W
• Redundant power inputs
• 12/24 VDC, 24 VAC, or Power-over-Ethernet (IEEE 802.3af)
Physical Characteristics
Camera Body Housing: Metal, IP30 protection
Dimensions:
• Camera Body: 78 x 65 x 150 mm
• Outdoor Housing: 134 (diam.) x 318 (L) mm
• Wallmounting Bracket: 205 mm (L)
Weight: 670 g
Installation: Wall mounting, pole mounting, corner mounting
Dimensions:
• Camera Body: 78 x 65 x 150 mm
• Outdoor Housing: 134 (diam.) x 318 (L) mm
• Wallmounting Bracket: 205 mm (L)
Weight: 670 g
Installation: Wall mounting, pole mounting, corner mounting
Note: Optional external housing and mounting accessories may be required.
Alarms
Intelligent Video: Camera tamper, virtual fence, alert zone, missing
object, unattended object
object, unattended object
Note: IVA functions are optional except for camera tamper.
Video Motion Detection: 3 independently configurable motion areas
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Video Recording: Event recordings stored on the SD card
Custom Alarms: HTTP event servers for setting customized alarm
actions
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP as event-triggered actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Video Recording: Event recordings stored on the SD card
Custom Alarms: HTTP event servers for setting customized alarm
actions
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP as event-triggered actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Security
Password: User level password protection
Filtering: By IP address
Authentication: 802.1X
Encryption: HTTPS, SSH
Filtering: By IP address
Authentication: 802.1X
Encryption: HTTPS, SSH
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Zone 2 Ex nCnAnL IIC T4
EMI: FCC Part 15, CISPR (EN 55022) Class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Traffic Control: NEMA TS2
Rail Traffic: EN 50121-4
Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX
Zone 2 Ex nCnAnL IIC T4
EMI: FCC Part 15, CISPR (EN 55022) Class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Traffic Control: NEMA TS2
Rail Traffic: EN 50121-4
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF
(mean time between failures)
Time: 541,826 hours
Database: Telcordia (Bellcore), GB 25°C
Database: Telcordia (Bellcore), GB 25°C
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Details: See www.moxa.com/warranty
Minimum Viewing System Requirements
CPU: Pentium 4, 2.4 GHz
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Software Development Kit
VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API
library for customized applications or system integration for third-party
developers (latest version available on Moxa website).
Standard: ONVIF
library for customized applications or system integration for third-party
developers (latest version available on Moxa website).
Standard: ONVIF
Dimensions
Unit: mm (inch)
147.6 (5.81)
81.76 (3.22)
76.29 (3)
62.64 (2.47)
69.65 (2.74)
M30x1.0
1/4"-20UNC
Side Views
Rear View
Front View